RESEARCH ARTICLE
Prediction of Wellbore Temperatures During the Scientific Ultra-Deep Drilling Process
Fanhe Meng, Aiguo Yao*, Shuwei Dong
Article Information
Identifiers and Pagination:
Year: 2015Volume: 8
First Page: 451
Last Page: 456
Publisher Id: TOPEJ-8-451
DOI: 10.2174/1874834101508010451
Article History:
Received Date: 26/5/2015Revision Received Date: 14/7/2015
Acceptance Date: 10/8/2015
Electronic publication date: 22/10/2015
Collection year: 2015
open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Abstract
In order to carry out a series of key basic researches, a scientific ultra-deep drilling plan is being undertaken in China. Wellbore temperature is one of the key factors during the drilling process. In this paper, we established a twodimensional transient numerical model to predict the ultra-deep wellbore temperature distributions during circulation and shut-in stages. The simulation results indicate that the cooling effect of drilling fluid circulation is very obvious, especially during the inception phase. Drilling fluid viscosity has great influence on the temperature distributions during circulation stage: the lower the viscosity, the higher the bottomhole temperature. While drilling fluid displacement and inlet temperature have a little effect on the bottomhole temperature. During the shut-in stage, the wellbore temperature recovery is a slow process.
