RESEARCH ARTICLE


Experiments of Blast Furnace Slag as a Mud Cake Modifier and Its Trial in Horizontal Well I306H



Jun Gu1, Jibiao He1, Baoliang Sun2, Mingfu Kou2, Wenping Zhang 1, Su Zhang 1
1 Petroleum Engineering Department, Faculty of Earth Resources, China University of Geosciences, Wuhan, 430074, China;
2 Yumen Oilfield Branch, PetroChina, Jiuquan 735000, China


Article Metrics

CrossRef Citations:
1
Total Statistics:

Full-Text HTML Views: 536
Abstract HTML Views: 680
PDF Downloads: 1
Total Views/Downloads: 1217
Unique Statistics:

Full-Text HTML Views: 360
Abstract HTML Views: 483
PDF Downloads: 1
Total Views/Downloads: 844



© Gu et al.;

open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

* Address correspondence to this author at the No. 388, Lumo Road, Wuhan, China. Postcard: 430074. Tel: +86 27 6784 8569; E-mail: gujun2199@126.com


Abstract

Blast furnace slag (BFS) was added into drilling fluid as a mud cake modifier (MCM) for the reuse of BFS. The effects of MCM on drilling fluid rheology and shear strength of cement- formation interface (SSCFI) were evaluated. The experimental results showed that the optimized formula of the drilling fluid has 1.0 wt% MCM. The simulation results showed that SSCFI increased significantly with the addition of MCM. Based on the mechanism analysis of BFS as an MCM to improve SSCFI, it is found that the transformation of mud cake to agglomerated cake (MTA) can be the main reason. The trial result of horizontal well I306H in Laojunmiao oilfield in China showed that the one-time success rate of cementing operation was 100% and the high quality rate was 79.78%. This horizontal well is flowing well after perforation with oil production of 11.5t/d and the water cut is only 9%. Compared to the adjacent horizontal wells after fracturing, the oil production rate is increased by 228.57%-259.38%. Obviously, the effect of BFS as an MCM is self-evident. Meanwhile, this research provides a new way for the recycling of BFS.

Keywords: Blast furnace slag, mud cake modifier, drilling fluid property.